Pages: 1 2 3 [4]
  Print  
Author Topic: Kcat300's 03 g35 sedan progress  (Read 2892 times)
kcat300

Offline Offline

Posts: 163


2003 g35 sedan


« Reply #45 on: May 20, 2017, 11:50 AM »

Car is running. Other than needing the plugs gapped, wiper blades, and a good wax she is ready to run
Logged
Trbulnt
ZCrew Staff

Offline Offline

Posts: 5177


Always Progressing!


« Reply #46 on: May 20, 2017, 05:10 PM »

Good to hear!
Logged

FNG Motorsports
'85 - 300ZX
'14 - Nismo Juke
'17 - Porsche Macan
kcat300

Offline Offline

Posts: 163


2003 g35 sedan


« Reply #47 on: June 23, 2017, 05:05 PM »

Well, car has been running good until today. Got In and drove it down the road and the tach and Speedo stopped working and the slip and rec off lights turned on. Took it home, checked the fuses. Scanned for codes. Found a cam sensor code and poor performance code. Cleared codes and tach/Speedo still don't work. Disconnected the battery, started the motor and the tach worked for about 3 seconds. In those 3 seconds the tach was very jumpy. Would a bad cam sensor cause all this? I could see the tach not working but the Speedo? Any insight or anyone seen this problem?
Logged
Trbulnt
ZCrew Staff

Offline Offline

Posts: 5177


Always Progressing!


« Reply #48 on: June 24, 2017, 07:15 PM »

Never seen this problem. Yes cam sensor may cause the problem. Id check the wire harness for any damage/burnt wires. 
Logged

FNG Motorsports
'85 - 300ZX
'14 - Nismo Juke
'17 - Porsche Macan
kcat300

Offline Offline

Posts: 163


2003 g35 sedan


« Reply #49 on: June 26, 2017, 04:49 PM »

Drove the car today and it's like it never happened, lol. Scanned for codes when I got home and picked up a u1001 and a p1212. One is a can system code with a tsb on a loose ground wire. The other is a tcs code with the main cause of a loose ground or weak battery. I'll be going through and checking for a loose ground while also installing a grounding wire kit.
Logged
Pages: 1 2 3 [4]
  Print  
 
Jump to:  


SimplePortal 2.2.1 © 2008-2009